Brother MFC-J6910DW - Page 41

Sending a fax
33
4
c You can change the following fax
sending settings. Press FAX and then
press d or c to scroll through the fax
settings. When the setting you want is
displayed, press it and choose your
option.
(Basic User's Guide)
For details changing the following fax
sending settings, see pages 34 to 35.
 Glass ScanSize
 Color Fax Transmission
 Preview Outgoing Fax
 Transmission Verification Report
(Setup)
(Advanced User's Guide)
For more advanced fax sending
operations and settings, see Chapter 3
Sending a fax in the Advanced User’s
Guide:
 Contrast
 Fax Resolution
 Set New Defaults
 Factory Reset
 Duplex fax
 Faxing at End of Call
 Broadcasting
 Real Time TX
 Overseas Mode
 Delayed Fax
 Batch TX
 Canceling Waiting Jobs
 Polled Transmit
d Enter the fax number.
Using the dial pad
Using the Phone Book
 Phone Book
Using call history
 Outgoing Call
 Caller ID hist.
Note
• You can preview a fax message before
sending it by setting Preview to On. (See
How to preview an outgoing fax
on page 34.)
• If your network supports the LDAP
protocol you can search for fax numbers
and E-mail addresses on your server.
(See LDAP operation in the Network
User’s Guide.)
e Press Mono Start or Color Start.
Faxing from the ADF
 The machine starts scanning the
document.
Faxing from the scanner glass
 When you press Mono Start, the
machine starts scanning the first
page.
Do one of the following:
• To send a single page, press No
(or press Mono Start again).
The machine starts sending the
document.
• To send more than one page,
press Yes and place the next
page on the scanner glass. Press
Mono Start or Color Start. The
machine starts scanning the
page. (Repeat this step for each
additional page.)
 If you press Color Start, press Yes.
The machine starts sending the
document.