Making copies
57
8
Tray Select 8
You can change the tray temporarily for the
next copy. To change the default tray setting
see Tray use in Copy mode on page 23.
a Press (COPY).
b Load your document.
c Enter the number of copies you want.
d Press d or c to display Tray Select.
e Press Tray Select.
f Press Tray#1, Tray#2 or
Auto Select.
g If you do not want to change additional
settings, press Mono Start or
Color Start.
Poster copy is not available when you use
Tray#2.
To Next Page
Loading...
