Brother MFC-J6925DW - Speaker Volume; Touchscreen LCD; Setting the Backlight Brightness

General information
21
1
Speaker Volume 1
You can choose from a range of speaker
volume levels.
a Press .
b Press All Settings.
c Swipe up or down, or press a or b to
display General Setup.
d Press General Setup.
e Swipe up or down, or press a or b to
display Volume.
f Press Volume.
g Press Speaker.
h Press Low, Med, High or Off.
i Press .
Touchscreen LCD 1
Setting the Backlight
brightness 1
If you are having difficulty reading the
Touchscreen LCD, try changing the
brightness setting.
a Press .
b Press All Settings.
c Swipe up or down, or press a or b to
display General Setup.
d Press General Setup.
e Swipe up or down, or press a or b to
display LCD Settings.
f Press LCD Settings.
g Press Backlight.
h Press Light, Med or Dark.
i Press .