5-13
Confidential
1.3.7 Save NetConfig data (function code: 18)
<Function>
This function is used to save NetConfig data to the USB flash memory.
<Operating Procedure>
(1) Press the [2], and then the [5] key in the initial state of maintenance mode.
"NETCONFIG" is displayed on the LCD.
(2) Insert the USB flash memory into the USB flash memory terminal.
(3) Press the [SET] key. "SAVE TO USB" is displayed on the LCD.
(4) Press the [SET] key. "USB SAVING" is displayed on the LCD, and NetConfig data is
saved to the USB flash memory. The machine returns to the initial state of maintenance
mode.
To Next Page
Loading...
