Brother MFC-L8650CDW - Replacing Periodic Maintenance Parts

Routine maintenance
57
A
Replacing periodic
maintenance parts A
The periodic maintenance parts must be
replaced regularly to maintain the print
quality. The parts listed in the table must be
replaced after printing approximately 50,000
pages
1
for PF Kit MP and 100,000 pages
1
for PF Kit 1, PF Kit 2
2
, Fuser and Laser.
Contact Brother customer service when
these messages appear on the Touchscreen.
1
A4 or Letter size single-sided pages.
2
When Tray 2 is installed.
Touchscreen
message
Description
Replace Fuser Replace the fuser unit.
Replace Laser Replace the laser unit.
Replace PF Kit1 Replace the paper
feeding kit for the paper
tray.
Replace PF Kit2
2
Replace the paper
feeding kit for the lower
tray (option).
Replace PF Kit MP Replace the paper
feeding kit for the multi-
purpose tray.