Setting Up the Machine
14
11 Choosing a Receive Mode
There are four possible receive modes: Fax Only,
Fax/Tel, Manual and External TAD.
1 Press Menu.
2 Press a or b to choose Initial Setup.
Press OK.
3 Press a or b to choose Receive Mode.
Press OK.
4 Press a or b to choose the mode.
Press OK.
5 Press Stop/Exit.
For details, see Using receive modes in
Chapter 6 of the User's Guide.
Do you use a Voice Mail
subscriber service?
See Voice Mail in
Chapter 7 of the
Your machine controls
the line and
automatically answers
every call. If the call is
not a fax, the phone will
ring for you to pick up
the call.
You control the phone
line and must answer
every call yourself.
Your external telephone
answering device (TAD)
automatically answers
every call. Voice messages
are stored on the external
TAD. Fax messages are
automatically printed.
External TAD
To Next Page
Loading...
