Brother MFC MFC-465CN

Setting Up the Machine
12
STEP 1
7 Enter the time in 24-hour format on the dial
pad, and then press OK.
Date&Time
Time:
15:25
(e.g. Enter 1 5, 2 5 for 3:25 P.M.)
8 Press Stop/Exit.
To confirm the current date and time, print
out the User Settings report. (See Printing
Reports in Chapter 10 of the User's Guide.)
9 Setting your station ID
You should store your name and fax number to be
printed on all fax pages that you send.
1 Press Menu.
2 Press a or b to choose Initial Setup.
Press OK.
3 Press a or b to choose Station ID.
Press OK.
4 Enter your fax number (up to 20 digits) on the
dial pad, and then press OK.
Station ID Fax:
_
5 Enter your name (up to 20 characters) using
the dial pad, and then press OK.
Station ID Name:
_
Note
• See the following chart for entering your name.
• If you need to enter a character that is on the same
key as the last character, press to move the
cursor to the right.
• If you entered a letter incorrectly and want to
change it, press or to move the cursor to
the incorrect character, press Clear/Back.
Press
key
One
time
Two
times
Three
times
Four
times
2 ABC2
3 DEF 3
4 GH I 4
5 JKL5
6 MNO6
7 PQRS
8 TUV8
9 WXY Z