2
2
Connect the handset
(MFC-790CW only)
a Connect the curled handset cord to the
handset.
3
Load plain Letter/A4
paper
a Pull the paper tray a completely out of the
machine.
b Open the paper tray cover a.
c With both hands, gently press and slide the
paper side guides a and then the paper length
guide b to fit the paper size.
Make sure that the triangular marks c on the
paper side guides a and paper length guide b
line up with the mark for the paper size you are
using.
Note
• The components included in the box may differ
depending on your country.
• Save all packing materials and the box in case
for any reason you must ship your machine.
• You need to purchase the correct interface
cable for the interface you want to use (for USB
or network connection).
USB cable
Please make sure you use a USB 2.0 cable (Type
A/B) that is no more than 6 feet (2 meters) long.
Network cable
Use a straight-through Category5 (or greater)
twisted-pair cable for 10BASE-T or 100BASE-TX
Fast Ethernet Network.
Note
MFC-990CW only
Make sure you remove the battery, battery cover
and cordless handset from the carton and from
their individual packaging. Save them for when
you Install the battery on page 13.
1
1
1
3
3
2
To Next Page
Loading...
Need help?
General
