2
2
Connect the power cord
and telephone line
a Connect the power cord.
b Lift the scanner cover until it locks securely into
the open position.
c Connect the telephone line cord.
Connect one end of the telephone line cord to
the jack marked LINE on the machine.
Carefully guide the telephone line cord into the
cable channel and out the back of the machine.
Connect the other end to a modular wall jack.
d Lift the scanner cover to release the lock a.
Gently push the scanner cover support
down b and close the scanner cover c using
both hands.
Be careful not to pinch your fingers when the
scanner cover closes.
DO NOT connect the USB cable yet (if you are
using a USB cable).
• If you do not plan to use the fax feature on this
machine, go to step 3 on page 3.
• To prolong the life of the print head, provide the
best ink economy and maintain print quality, we
do not recommend unplugging the machine
frequently and/or leaving the machine
unplugged for extended periods of time. Each
time you plug the machine in, it automatically
cleans the print head, which uses some of your
ink.
We recommend using to power down the
machine. Using allows minimal power to
the machine, resulting in periodic, but less
frequent, cleaning of the print head.
The telephone line cord MUST be connected to
the jack marked LINE on the machine.
To Next Page
Loading...
