3
3
Fill the ink tanks
If ink gets in your eyes, wash it out with water at
once and call a doctor if you are concerned.
a Make sure that the power is turned on.
b Open the ink tank cover a.
c Lift the cap of the ink tank for the color you want
to fill.
d Unpack the ink bottle.
e Remove the cap of the ink bottle, remove the
film from the ink bottle, and then replace the
cap.
f Remove the tip of the ink bottle.
g Make sure that the color of the ink tank cap
matches the ink color you want to fill.
Insert the nozzle of the ink bottle firmly so that
the ink will not be spilled.
Fill the ink tank by gently squeezing the bottle
as shown.
DO NOT shake the ink bottles. If ink stains your
skin or clothing, wash with soap or detergent at
once.
Make sure you use the Starter Ink Bottles
included with your machine first.
Be careful not to touch any ink when you handle
the cap of the ink tank.
Replace the ink bottle cap tightly. Otherwise ink
may leak.
• Be careful not to spill any ink when you fill the
ink tank.
• Empty the entire bottle into the ink tank.
To Next Page
Loading...
