What to do if my Brother Label Maker display stays blank?
If the display stays blank after you have turned on the Brother Label Maker, check that the AC adapter is connected correctly. If you are using alkaline batteries, check that they are correctly inserted. If the batteries are low, replace them with new ones.
What to do if my Brother Label Maker printed characters are not formed properly?
If the printed characters on your Brother Label Maker are not formed properly, and you are using alkaline batteries, they may be low. Try using the AC adapter or replace the batteries with new ones.
What to do if my Brother Label Maker shows striped tape?
If striped tape appears on your Brother Label Maker, you have reached the end of the tape. Replace the tape cassette with a new one.
Why is my Brother Label Maker producing striped tape?
If you find striped tape appearing from your Brother Label Maker, replace the tape cassette with a new one.
General| Series | P-Touch |
|---|---|
| Print Technology | Thermal Transfer |
| Print Speed | 10 mm / sec |
| Tape Width | 3.5mm, 6mm, 9mm, 12mm |
| Display | LCD |
| Power Source | AC Adapter or Battery |
| Battery Type | AA |
Details the compliance of the PT-1800 with relevant EMC and Low Voltage Directives.
Illustrates and labels the main external parts of the P-touch 1800 when viewed from above.
Illustrates and labels the main external parts of the P-touch 1800 when viewed from below.
Details the method for easily removing the backing from laminated labels using an included stick.
Describes the technique for peeling backing from non-laminated tapes by folding them.
Instructions on pressing the power key to start the P-touch 1800 and what appears on the display.
Procedure to clear all entered text and reset all formatting options to their default settings.
Instructions for moving the cursor left by character or to the beginning of the line.
Instructions for moving the cursor right by character or to the end of the line.
Instructions for moving the cursor up by line or to the beginning of the entire text.
Instructions for moving the cursor down by line or to the end of the entire text.
How to use the Code key to access functions printed above other keys on the P-touch 1800.
Instructions for typing characters in color on the key tops using the Alt key.
How to use the Shift key to type uppercase letters or symbols in the upper-left corner of keys.
To Next Page