Brother P-touch Embellish ELITE PT-P715eBT Quick Setup Guide

LED Troubleshooting
Power
LED
Lit/
Flashing
Condition
How to
Clear
an Error
Solution
Red
Flashing
twice per
second,
then off for
1second
Battery failure
Lightly
press the
Power
Button.
If the problem is still not
resolved, replace the
battery.
Flashing
(1 second
intervals)
Insufficient charge
Restart
the label
printer.
Make sure you have
removed the protective
sheet.
Charge the battery.
 1R5LEERQ7DSH
Cassette installed.
 ,QFRUUHFW5LEERQ
Tape Cassette
installed.
 ,QFRPSDWLEOH
Ribbon/Tape
Cassette installed.
Lightly
press the
Power
Button.
Insert the correct Ribbon/
Tape Cassette.
High temperature
error
Wait a short while, then try
DJDLQDIWHUWKH3RZHU/('
changes to green.
Transmission error
Restart
the label
printer.
When using a mobile
device:
Establish a Bluetooth
connection.
When using a computer:
 5HFRQQHFWWKH86%
cable.
 &KDQJHWKH86%SRUW
Cutter error Restart the label printer.
Lit
Program transfer
failure
Transfer the program again.
If the problem is still not resolved,
contact Brother customer service.
Flashing
(0.3 second
intervals)
System error
Contact Brother customer service.
(The flashing pattern may change if
you touch the Power Button.)

Brother P-touch Embellish ELITE PT-P715eBT Specifications

General

Brand	Brother
Model	P-touch Embellish ELITE PT-P715eBT
Category	Printer
Language	English