9LVLWinstall.brother and install the printer driver and P-touch Editor by
following the on-screen instructions.
8. Print from Your Computer
The following software can
be selected for installation:
Features
Printer Driver Software required to print from a label printer.
P-touch Editor
Label creation software for computers. This
application comes with built-in drawing tools
that allow you to print a wide variety of custom
labels in complex layouts with text of different
fonts and styles, frames, imported images,
barcodes, etc.
P-touch Update Software
Update applications to the latest version.
9LVLWsupport.brother.com
to update P-touch
Editor for Mac.
Printer Setting Tool Configure settings for the label printer.
:KHQXVLQJ7=H5ULEERQVHOHFWSpecial Tape in Cut Options.
*OXHIURPSUHYLRXVODEHOVPD\VWick to the cutter, causing uneven
cuts in the satin ribbon.
:HUHFRPPHQGFXWWLQJthe ribbon manually.
:KHQXVLQJWDSHODEHOVDIWHUWKHODst label is printed, press the
Power Button twice quickly to eject and cut the last label. Note that
the label printer will feed about 1 in./25 mm of leader tape before the
next new label when you use this method.
'XHWRWKHVWUXFWXUHRIWKHODPLQDte, when Auto Cut is ON, the label
printer feeds approximately 1 in./25 mm of leader tape before every
new ribbon/label. When printing multiple labels, you can prevent the
generation of the blank space on the second and subsequent labels.
Select Chain Printing in the optional settings of printing. Then print
your labels and leave the last label in the label printer until you are
ready to print a new label.
:KHQSULQWLQJIURP\RXUFRPSXWer, you must connect the label
printer and computer with the included USB cable.
7KLVODEHOSULQWHUGRHVnot support Wi-Fi connections.
To Next Page
Loading...
Need help?
General