Brother P-touch H300 - Getting Started

1
2
3
4
5
6
7
8
9
11
z
INTRODUCTION
Symbols Used in this Guide
• Markings made with oil-based or water-based ink may be visible through a label affixed
over them. To hide the markings, use two labels layered on top of each other or use a dark-
coloured label.
• Any data stored in memory will be lost due to failure or repair of the P-touch, or if the
battery expires.
• When power is disconnected for more than two minutes, all text and format settings will be
cleared. Any text files stored in the memory will also be cleared.
• A protective clear plastic sticker is placed over the display during manufacturing and
shipping. This sticker should be removed prior to use.
• You can also use Heat Shrink Tube in this model. Please check the Brother website
(http://www.brother.com/) for further information. You may not be able to use some print
frame, label collection, or font settings when using heat shrink tape.
• The P-touch is not equipped with a charging feature for Ni-MH rechargeable batteries.
• The printed label may differ from the image that appears on the LCD.
• Note that Brother Industries, Ltd. does not assume responsibility for any damage or injury
arising from the failure to follow the precautions listed in this manual.
• We strongly recommend that you read this User’s Guide carefully before using your
P-touch, and then keep it nearby for future reference.
The following symbols are used throughout this guide to indicate additional information.
Symbols Used in this Guide
:
This symbol indicates information or directions that may result in damage or
injury if ignored, or operations that will result in errors.
:
This symbol indicates information or directions that may help you understand
and use the P-touch more efficiently.