1
2
3
4
5
6
7
8
9
19
z GETTING STARTED
Power Supply
AC Adapter AD-E001 (Optional)
Use AD-E001 (AC adapter) for this machine. AD-18 or AD-24ES cannot be used.
Connect the AC adapter directly to the P-touch.
Insert the plug on the AC adapter cord into the connector marked DC IN 12 V on the
P-touch.
Insert the AC adapter plug into a standard electrical outlet.
1
2
• Turn the P-touch off before disconnecting the AC adapter.
• Do not pull or bend the AC adapter cord.
To safeguard and backup the memory, when the AC adapter is unplugged it is recommended to have AA-
size alkaline batteries (LR06) or Ni-MH rechargeable batteries (HR06) installed in the machine.
WARNING
• Only use the official AC adapter, which is designed for your P-touch. Failure to observe this
may result in an accident or damage. Brother shall not assume any responsibility for any
accident or damage resulting from not using the specified AC adapter.
• Do not connect the AC adapter to a non-standard electrical outlet. Failure to observe this may
result in an accident or damage. Brother shall not assume any responsibility for any accident
or damage resulting from not using a standard electrical outlet.
CAUTION
• Disconnect the AC adapter from the P-touch and electrical outlet when you do not intend to
use the P-touch for an extended period.
• When power is disconnected for more than two minutes, all text and format settings will be
cleared. Any text files stored in the memory will also be cleared.
To Next Page
Loading...
