1
2
3
4
5
6
7
8
9
25
EDITING A LABEL
Entering Symbols
Deleting Text
Deleting one character at a time
• To delete a character from an existing line of text, move the cursor to the character
to the right of the position you want to start deleting text and then press the key.
The character to the left of the cursor is deleted each time the key is pressed.
Deleting all text at once
• Use the key to delete all text at once.
Press the key.
The Clear options are displayed.
Using the or keys, select “Text Only” to delete
all text while retaining the current format settings, or
select “Text & Format” to delete all text and format
settings.
Press the key.
All text is deleted. All format settings are also deleted
if Text & Format was selected.
Including the symbols available on the keyboard, there are a total of 103 symbols
(including international and extended ASCII characters) available with the Symbol
function.
There are two methods of entering symbols:
• Using the key.
• Using the Symbol function.
Entering Symbols Using Key
Symbols printed in blue above the keys on the keyboard can be entered using the
key.
• To enter one of these symbols, hold down the key and then press the desired key.
If you hold down the key, the characters left to the cursor are deleted continuously.
1
Press the key to return to the text entry screen.
2
3
Entering Symbols
To Next Page
Loading...
Need help?
General
