67
NUMBERING FUNCTION
This function can be used to print many copies of the same text while increasing a certain
number in the text by 1 after each label is printed.
To use the Numbering function:
1 Press , , or to position the cursor below the number that you wish
to increase.
2 Hold down and press . The message “NUMBER UNTIL 1–9?” appears in the
display.
3 Press the number key ( to ) of the last number that is to be printed.
☞
To cancel the Numbering, hold down and press (or press just ).
4 Press (or ) to begin printing the labels. The number of each copy is dis-
played while it is being printed.
5 After the tape is automatically cut off, use scissors to cut along the cutting guide and
separate the labels.
EXAMPLE
To print three labels with numbers 1, 2 and 3:
1
Position the cursor below “1”.
2 Hold down and press .
Home
End
Number
Font
M.Del
Number
Clear
Mirror
Alt
Caps
1:
STUDIO 1
_
Undl/Frm
Length
Wide
Alt
Caps
UNTIL 1–9?
NUMBER
Undl/Frm
Length
Wide
Number
To Next Page
Loading...
