Brother P-Touch PT-E500 - Using the File Memory; Storing a Label into Memory; Opening a Stored Label File

13
Attaching Labels
8
1
2
3
4
5
6
7
 LABEL PRINTING
If necessary, trim the printed label to the desired shape and length using scissors, etc.
Peel the backing from the label.
Position the label and then press firmly from top to bottom with your finger to attach the
label.
Attaching Labels
1
2
3
• The backing of some types of tapes may be pre-cut to make it easier to peel the backing. To
remove the backing, simply fold the label lengthwise with the text facing inward, to expose the
inside edges of the backing. Next, peel off the backing one piece at a time.
• Labels may be difficult to attach to surfaces that are wet, dirty, or uneven. The labels may peel
off easily from these surfaces.
• Be sure to read the instructions provided with Fabric Tapes, Extra Strength Adhesive Tapes or
other special tapes and observe all precautions noted in the instructions.
• Please use scissors to cut Heat Shrink Tube.