Brother P-Touch PT-E500 - Using the Data Transferred to the P-touch Labeling System

USING P-TOUCH SOFTWARE
34
Using P-touch Transfer Manager (For Windows
®
)
Deleting All the P-touch Labeling System data
Use the following procedure to delete all templates or other data that are saved in the P-touch
labeling system.
Connect the computer and the P-touch labeling system and turn on the P-touch labeling
system.
The model name is displayed in the folder view.
Right-click your model, and then select [Delete All].
A confirmation message is displayed.
Click [OK].
All templates and other data saved in the P-touch labeling system are deleted.
1
2
3