QL-1050 Linux Printer Driver Manual Brother Industries, Ltd. P&S Company 1
1. Overview
1.1. Introduction
This manual provides information on the Linux driver for the QL-1050 label printers.
The Linux driver for the QL-1050 label printers consists of two types of drivers.
[1] LPR driver
The print features can be used with a Linux system that uses the LPD print service.
[2] CUPS wrapper driver
The CUPS wrapper driver operates the LPR driver as a CUPS driver.
The LPR driver must be installed before the CUPS wrapper driver is installed.
For compatibility with the different measurement units, a CUPS wrapper driver that displays values in
millimeters and a CUPS wrapper driver that displays values in inches are available.
This software provides the installer package that automatically copies the appropriate driver file (from those
mentioned above) to your Linux distribution.
Notes
－ Only the English versions of the drivers are currently available.
－ The content of this manual does not guarantee the operation of our product in your Linux operating
environment.
－ We guarantee no part of the contents of this manual. The installation and use is the sole responsibility
of the user.
1.2. System requirements
Driver QL-1050
Port
USB port (USB 1.1 or later)
Serial port (RS-232C)
Computer IBM-compatible PC (CPU architecture: x86)
Linux distribution RPM or DEB (Refer to section 1.3 for details.)
To Next Page
Loading...
Need help?
General
