Brother PCL - Chapter 8 Bar Code Control; Chapter 5 Pjl Printer Job Language; Introduction

2006/05/31
CHAPTER 8 BAR CODE CONTROL - 2
CONTENTS
1. INTRODUCTION...................................................................................................................3
2. PRINT BAR CODES OR EXPANDED CHARACTERS ........................................................4
3. DEFINITION OF PARAMETERS..........................................................................................5
3.1. Bar Code Mode............................................................................................................................5
3.2. Bar Code Style, Expanded Character Shading, Line Block Drawing & Box Drawing Shading .... 5
3.3. Bar Code Scaling (Width only)..................................................................................................... 6
3.4. Bar Code Human Readable Line On or Off.................................................................................. 6
3.5. Quiet Zone ................................................................................................................................... 6
3.6. Bar Code, Expanded Character Unit, Line Block Drawing & Box Drawing Units......................... 6
3.7. Bar Code, Expanded Character, Line, Block Drawing & Box Drawing Offset in the X-axis ......... 7
3.8. Bar Code & Expanded Character Offset in the Y-axis ................................................................. 7
3.9. Bar Code, Expanded Character, Line, Block Drawing & Box Drawing Height ............................. 7
3.10. Expanded Character, Line Block Drawing & Box Drawing Width............................................. 7
3.11. Expanded Character Rotation .................................................................................................. 7
3.12. Bar Code Data Start .................................................................................................................8
3.13. Box Drawing ............................................................................................................................. 9
3.14. Line Block Drawing...................................................................................................................9
3.15. Expanded Character Data Start ............................................................................................... 9
3.16. Table of Code(EAN) 128 set C............................................................................................... 10
4. EXAMPLE PROGRAM LISTINGS......................................................................................11