2006/05/31
APPENDIX C HBP MODE COMMANDS - 5
3. HBP COMMANDS
An HBP command is composed of ‘@’ + an Uppercase Alphabetic character + parameters (not necessary for
some commands).
3.1 Command List
<Character string> <Functions>
@A Reserved
@B Reserved
@C Not used
@D Speed setting for Centronics I/F
@E Economy mode setting
@F Form feed
@G Data input
@H Not used
@I Information request
@J Settings for engine related items
@K Execution for engine related items
@L Resolution setting
@M Mode setting
@N Reserved
@O Not used
@P Reserved
@Q Not used
@R Reserved
@S Not used
@T Setting for sleep time
@U Not used
@V Not used
@W Not used
@X Exit
@Y Not used
@Z Not used
Not used : An error occurs in the printer if these character strings are sent as commands.
Reserved : These commands are not necessary to create the driver. Do not use these commands.
To Next Page
Loading...
