Brother PJ-600 Series - Page 35

Brother PJ-600/700/800 Series Command Reference
32
© 2015 Brother Industries, Ltd. All Rights Reserved.
Name
Apply/cancel proportional characters
Syntax
ESC + p + {n1}
1B H + 70 H + {n1}
Description
Applies or cancels proportional characters for alphanumeric characters.
After this command is specified, the left margin and right margin must be specified
again.
Definition of {n1}
00 H(0): Cancel proportional characters
01 H(1): Apply proportional characters
Name
Auto-on/off
Syntax
ESC + ~ + A + {n1}
1B H + 7E H + 41 H + {n1}
Description
Select whether or not the print unit is automatically turned on when it is plugged
into an external power supply.
Definition of {n1}:
00 H(0):Disable
01 H(1):Enable
02 H(2):Enable(No main button)
Name
Specify Auto Power Off (AC/DC/Li-ion)
Syntax
ESC + ~ + e + t + {n1} + NUL
1B H + 7E H + 65 H + 74 H + {n1} + 00 H
Description
Select the length of time until the print unit automatically turns off when it is
plugged into an external power supply.
Definition of {n1}:
00 H(0)：None
01 H(1)：10 minutes
02 H(2):20 minutes
03 H(3):30 minutes
04 H(4):40 minutes
05 H(5):50 minutes
06 H(6):60 minutes