Brother PJ-600 Series - Series Utility Command Details

Brother PJ-600/700/800 Series Command Reference
44
© 2015 Brother Industries, Ltd. All Rights Reserved.
5.3.3. PJ-700 and PJ-800 Series Utility Command details
This section describes the utility commands common to the PJ-700 and PJ-800 series.
Name
Command Mode
Syntax
ESC + i + X + i + 2 + 01h + 00h + {n1}
Description
Specifies the printer’s command format.
Definition of {n1}
00 H(0): Raster
03 H(1): P-touch Template
04 H(2): ESC/P Brother
10 H(3): ESC/P Legacy
Name
Print Length Scaling
Syntax
ESC + ^ + L + 01h + {n1}
Description
Specifies the reduction or enlargement ratio for printing.
Definition of {n1}
CEh : 95% ~ 00h : 100% ~ 32h : 105%
Name
Paper Grip Time
Syntax
ESC + ~ + e + K + 01h + {n1}
Description
Specifies the delay before the printer grabs the paper.
Definition of {n1}
05h : 0.5 seconds
08h : 0.8 seconds
0Ch : 1.2 seconds
Name
Print Data after Printing
Syntax
ESC + i + X + s + 32h + 00h + {n1}
Description
Allows to erase print data after it is printed.
Definition of {n1}
00h : Keep Print Data
01h : Erase All Print Data
Name
JPEG Printing Setting
Syntax
ESC + ~ + e + J + 01h + {n1}