Brother PJ-600 Series - Utility Command Details; PJ-600 Series Utility Command Details

Brother PJ-600/700/800 Series Command Reference
29
© 2015 Brother Industries, Ltd. All Rights Reserved.
5.3. Utility Command details
Note: These commands are primarily for setting power-on default values for printer
specific settings and for printing text-only data. When the printer gets turned off, it will
return to the previous setting. In order to keep the current setting statically, please use
this command.
5.3.1. PJ-600 Series Utility Command details
Name
Specify page length in lines
Syntax
ESC + C + {n1}
1B H + 43 H + {n1}
Description
Specifies the page length as ((line feed amount when this command is specified) *
(n in lines)) inches.
In addition, when this command is executed, the bottom margin is set to 0
(canceled).
Definition of {n1}:01 H ～ 7F H(1～127)
・Basic page length settings (in lines) for each paper size and line feed
6LPI 8LPI/0.125 8LPI/0.12
Letter 66 88 91
Legal 84 112 116
A4 70 93 97
Name
Specify bottom margin
Syntax
ESC + N + {n1}
1B H + 4E H + {n1}
Description
Specify the size of the bottom margin.
Definition of {n1}:01 H ～ 7F H(1～127)
The units are in lines.
・Basic bottom margin settings for each paper size and line feed
6LPI 8LPI/0.125 8LPI/0.12
Letter 2 3 2
Legal 2 3 2
A4 2 3 2