Brother PJ-600 Series - PJ-700 Series Utility Command Details

Brother PJ-600/700/800 Series Command Reference
42
© 2015 Brother Industries, Ltd. All Rights Reserved.
Name
Retrieve current settings (except Bluetooth settings)
Syntax
ESC + ~ + e + U + {n1}
1B H + 7E H + 65 H + 55 H + {n1}
Description
Retrieves the settings for the parameters that can be specified, except those
related to Bluetooth.
The data size (2 bytes) and data are returned from the machine.
The normal data size is 34 bytes.
For details on the data, refer to 5.4.
Definition of {n1}:
00 H(0): Host transmission
Name
Save settings
Syntax
ESC + ~ + S
1B H + 7E H + 53 H
Description
Saves the settings on the printer.
Overwrites them even if they are the same as those on the RAM and non-volatile
memory.
Firmware version acquisition
If you want to check the firmware version, refer to the P-touch template command reference.
5.3.2. PJ-700 Series Utility Command details
In this section, the Utility commands for only PJ-700 Series are listed.
Name
Auto Power Off (AC/DC) 1 minute
Syntax
ESC + ~+ e + t + {n1} + 01h
Description
Specifies the amount of time that passes before the printer turns off automatically
when connected to an AC or DC power outlet.
Definition of {n1}
00h: None ~ 78h: 120 minutes
Name
Auto Power Off (Li-ion) 1 minute
Syntax
ESC + ~+ t + {n1} + 01h
Description
Specifies the amount of time that passes before the printer turns off automatically