Brother PJ-600 Series - PJ-800 Series Utility Command Details

Brother PJ-600/700/800 Series Command Reference
46
© 2015 Brother Industries, Ltd. All Rights Reserved.
5.3.4. PJ-800 Series Utility Command details
In this section, the Utility commands for only PJ-800 Series are listed.
Name
Print Speed
Syntax
ESC + ~ + e + V + 01h + {n1}
Description
Specifies the printing speed in inches or millimeters per second.
Definition of {n1}
00 H(0): 3.5 ips / 90 mm/s
01 H(1): 2.7 ips / 70 mm/s
02 H(2): 1.9 ips / 48 mm/s
03 H(3): 1.1 ips / 27 mm/s
04 H(4): Fast (Line Conversion)
05 H(5): Fast (Draft Quality)
Name
Tear Adjust
Syntax
ESC + ~ + e + r + 01h + {n1}
Description
Adjust the tear bar tear off position for paper media.
Definition of {n1}
30h : +0.2" ~ 00h : 0" ~ D0h : -0.2"
Name
Roll Printer Case Setting
Syntax
ESC +~ + e + R + 01h + {n1}
Description
Specifies the setting for using the optional roll printer case.
Only when “04h: On (Custom Option)” is specified, “Adjusting the transport
distance at the end of a job” and “Lead position adjustment” take effect.
Definition of {n1}
00h: Off
01h: On (Without Anti Curl)
02h: On (With Anti Curl)
03h: On (Short Feed)
04h: On (Custom Option)
Name
Auto Power Off 10 minutes
Syntax
ESC + i+ U + A + 00h + {n1}
Description
Specifies the amount of time that passes before the printer turns off automatically.