Setting Up the Printer
30
1
WPS (Wi-Fi Protected Setup™) 1
If your Wi-Fi access point/router supports WPS, settings and connections can be configured easily.
a First, confirm that your Wi-Fi access point/router has the WPS symbol.
b Place your printer within the range of your Wi-Fi access point/router. The range may differ depending on
your environment. See the instructions provided with your Wi-Fi access point/router.
c Press the WPS button on your Wi-Fi access point/router, and press and hold the (Wi-Fi) button on the
printer for about five seconds.
The (Wi-Fi) indicator on the printer flashes in blue once every second.
When the connection is established, the (Wi-Fi) indicator lights in blue. Computers and mobile devices
that are on the same network as the printer will have access to the printer.
Your printer will try to connect using WPS for two minutes. If the (Wi-Fi) button is held down for another
five seconds during that time, the printer will continue trying to connect for an additional two minutes.
To Next Page
Loading...
