Changing the Printer Settings
47
3
c Check that the printer you want to configure appears beside [Printer]. If a different printer appears,
select the printer you want from the drop-down list.
If only one printer is connected, it is unnecessary to make a selection since only that printer is available.
d Select the setting you want to change, and then specify or change the settings in the dialog box.
For more information on the settings dialog boxes, see Communication Settings
(PJ-762/PJ-763/PJ-763MFi/PJ-773 Only) on page 48, Device Settings on page 63 or P-touch Template
Settings on page 75.
e Click [Apply] - [Exit] in the settings dialog box to apply the settings to the printer.
f Click [Exit] in the main window to finish specifying settings.
Use the “Printer Setting Tool” to configure the printer only when the printer is in standby. The printer may
malfunction if you attempt to configure it while it is handling a job.
To Next Page
Loading...
