17
2
2
Operation Panel 2
The operation panel consists of the (Power) button, (Feed) button and the indicators.
1 (Power) button
2(Feed)button
3 POWER indicator
4 DATA indicator
5 STATUS indicator
6 (Bluetooth) indicator (PJ-662/663 only)
Power Button and Feed Button Functions 2
Rechargeable Li-ion battery is not controlled by these functions.
Using the Printer 2
3
1
2
4
5
6
(Power) button function
Operation
Turn the printer on
While the printer is turned off, press and hold the (Power) button for
about one second until the POWER indicator turns on.
Turn the printer off
Press the (Power) button quickly two times. (If the Auto-Off feature
is enabled in PJ-600 Series Utility, the printer will turn itself off
automatically after the selected period of inactivity.)
Charge the rechargeable Ni-MH
battery
While the printer is turned off, press and hold the (Power) button for
two or more seconds until the POWER indicator begins to blink in
green and orange. The POWER indicator continues to blink until
charging is complete. For details on charging the rechargeable Ni-MH
battery, see Charging the Rechargeable Ni-MH Battery on page 3.
The rechargeable Ni-MH battery may be charged without being
refreshed, depending on the setting specified for [Refresh Ni-MH
Battery] in PJ-600 Series Utility (see Refresh Ni-MH Battery
on page 32).
Skip rechargeable Ni-MH battery
refresh, begin charging
While the rechargeable Ni-MH battery is being refreshed, press and
hold the (Power) button to stop refreshing the battery and begin
charging it.
Turn the printer off while charging
the rechargeable Ni-MH battery
Press the (Power) button quickly two times.
To Next Page
Loading...
Need help?
General