Chapter 7
50
Pages Are Partially Printed 7
Problem Solution
The DATA indicator turns off while a page
remains in the printer
The computer program may not have sent a full page of data.
Try printing the document again.
The computer program may have sent the wrong page size
information, or the paper loaded is the wrong size. Check
settings in the computer program and the print driver for the
proper page size. Make sure that the page size specified in the
computer program matches the paper that is loaded.
Make sure that the [Form Feed Mode] setting of the printer
driver is not set to [No Feed].
Try pressing the (Feed) button to manually form feed.
The printer ejects a partially printed page,
and the DATA indicator remains lit or
blinking in green
Make sure that the computer program’s paper size setting is
correct.
To Next Page
Loading...
Need help?
General