Brother PT-E550W - Using your Brother machines own functions; Selecting the Network Type; Displaying the Network Settings

Configuring your machine for a wireless network
14
5
Using your Brother machine’s own functions 5
You can select the network type, configure or display the network settings, and so on, using the Menu key.
Selecting the Network Type 5
1 Press the Menu key, select “WLAN” using the a or b key and then press the OK or Enter key.
2 Select “Network Mode” using the a or b key and then press the OK or Enter key.
3 Select the network type to be used using the a or b key and then press the OK or Enter key.
“Off”: Wireless network OFF
“Direct Mode”: Connect using Wireless Direct
“Infrastructure Mode”: Connect using WLAN
The screen then returns to the text entry screen.
4 If some messages are displayed, press the OK or Enter for each message.
Displaying the Network Settings 5
1 Press the Menu key, select “WLAN” using the a or b key and then press the OK or Enter key.
2 Select “Network Status” using the a or b key and then press the OK or Enter key.
3 Select “Infrastructure Mode” using the a or b key and then press the OK or Enter key.
The current Infrastructure Mode settings are displayed.
NOTE
When using the Direct Mode, select “Direct Mode”.
4 The screen returns to the text entry screen when you press the OK or Enter key.