EasyManua.ls Logo

Brother QL-1110NWB - User Manual

Brother QL-1110NWB
175 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
User’s Guide
QL-1110NWB
Read the Product Safety Guide first, then read the Quick Setup Guide for
the correct setup procedure. After reading this guide, keep it in a safe
place for quick reference.
Version 01
ENG

Table of Contents

Other manuals for Brother QL-1110NWB

Preview: Quick Setup Guide
Quick Setup Guide8 pages

Questions and Answers

  • M
    moralesmckenzieAug 17, 2025
    What to do if my Brother QL-1110NWB is not printing or I receive a printing error?
    • L
      Leslie MorganAug 17, 2025
      First, ensure the USB cable is securely connected. Then, remove and reinstall the DK Roll, making sure there's enough roll remaining. Also, verify that the DK Roll Compartment Cover is properly closed. Try turning the printer off and then on again. If the problem persists and the printer is connected via a USB hub, try connecting it directly to the computer or to another USB port.
  • A
    amber59Aug 20, 2025
    What to do if I want to reset an error on my Brother QL-1110NWB Label Maker?
    • W
      william17Aug 20, 2025
      To reset an error, follow these steps: 1. Open and then close the DK Roll Compartment Cover. 2. If the error isn't reset, press the Cutter Button. 3. If the error isn't reset, turn the printer off, and then turn it on again.
  • A
    Amy KellyAug 22, 2025
    What to do if a cutter error occurs on my Brother QL-1110NWB?
    • B
      Brianna SanchezAug 22, 2025
      If a cutter error occurs, keep the DK Roll Compartment Cover closed and press the Power Button. The cutter will move back to its normal position, and the printer will turn off automatically. After the printer is off, check the Label Output Slot and remove any jammed labels.
  • E
    Eduardo JohnsonAug 26, 2025
    What to do if my Brother Label Printer does not print?
    • P
      paulhernandezAug 26, 2025
      If your Brother Label Printer isn't printing or you're getting a printing error, first ensure the USB cable is securely connected. Then, remove and reinsert the DK Roll. Also, verify there's enough DK Roll remaining and that the DK Roll Compartment Cover is fully closed. Try turning the printer off and on again. If connected via a USB hub, connect it directly to the computer or try a different USB port.
  • H
    Hunter KentAug 28, 2025
    How to reset an error on a Brother Label Maker?
    • J
      Justin HicksAug 28, 2025
      If you're unable to reset an error on your Brother Label Printer, try opening and then closing the DK Roll Compartment Cover. If that doesn't work, press the Cutter button. As a last resort, turn the printer off and then on again.
  • S
    Sarah MartinezAug 31, 2025
    What to do if I see a cutter error on my Brother Label Maker?
    • A
      Andrew DavisAug 31, 2025
      If the Brother Label Maker cutter shows an error, keep the DK Roll Compartment Cover closed and press the Power button. After the Label Printer is off, check the Label Output Slot and remove any jammed labels.
  • A
    aaronmooreSep 2, 2025
    What to do if the label is not ejected correctly after printing with my Brother QL-1110NWB?
    • R
      rebecca49Sep 2, 2025
      If labels are not ejecting correctly from your Brother Label Maker after printing, check that the Label Output Slot is not blocked. Also, check that the DK Roll is set correctly by removing it and reinstalling it. Ensure that the DK Roll Compartment Cover is closed correctly.
  • L
    Lucas JonesSep 5, 2025
    What to do if the label is not ejected correctly after printing from my Brother QL-1110NWB Label Maker?
    • M
      mullinselizabethSep 5, 2025
      Check that the Label Output Slot is not blocked. Also, verify that the DK Roll is set correctly by removing and then reinstalling it. Make sure the DK Roll Compartment Cover is closed correctly.
  • D
    Dr. Leah Rodriguez PhDSep 8, 2025
    Why is the status LED not lit on my Brother QL-1110NWB?
    • M
      michael40Sep 8, 2025
      Check that the AC Power Cord is properly inserted into the printer. If it is, try plugging the cord into another electrical socket to ensure the issue isn't with the original socket.
  • T
    thomaswelchSep 10, 2025
    What to do if a data transmission error appears on my computer when using Brother QL-1110NWB?
    • M
      Miguel QuinnSep 12, 2025
      Check that the correct port is selected from the "Print to the following port" list in the Printer Properties dialog box. Wait until the Status LED stops flashing and then try printing again.

Summary

Introduction and Setup

Important Notice

Key disclaimers and important information about the product and its documentation.

General Precautions

Specific guidelines and warnings for handling and using DK Rolls.

Set Up the Label Printer

Identification and explanation of the printer's physical components and controls.

Load the DK Roll

Step-by-step instructions for inserting the label roll correctly.

Turn Power On;Off

Procedure for powering the label printer on and off.

Printing Operations

Install Printer Drivers and Software

Steps to install essential software for computer printing.

Connect the Label Printer to a Computer

Methods for establishing a connection between the printer and a computer.

Create Labels from Your Computer

Detailed guide on designing and printing labels using computer software.

Print Using a Mobile Device

Guide to downloading and installing Brother's mobile printing apps.

Print Labels from a Mobile Device

Instructions for printing labels directly from a smartphone or tablet.

Standard Template Printing

Basic procedure for printing templates using barcodes with the P-touch Template function.

Settings and Management

Printer Setting Tool for Windows

Introduction to the utility for managing printer settings on Windows computers.

Communication Settings for Windows

Configuration options for network and wireless communication settings.

Web Based Management

Description of what can be done using Web Based Management.

Configure Settings Using Web Based Management

Steps to manage printer settings via a web browser interface.

Maintenance and Troubleshooting

Reset the Label Printer

Procedure to reset the printer to factory defaults using its buttons.

LED Indications

Explanation of the printer's status LEDs and their meanings.

Printing Problems

Common issues encountered during printing and their solutions.

Network Setup Problems

Troubleshooting steps for resolving network connectivity issues.

Specifications and Advanced Topics

Label Printer Specifications

Detailed technical specifications of the label printer model.

Configure Your Label Printer for a Network

Guide on setting up the printer's IP address, subnet mask, and gateway.

Use the Brother Barcode Scanner (Optional: PA-BR-001)

Instructions for using the optional barcode scanner with P-touch Template.

Brother QL-1110NWB Specifications

General IconGeneral
ColorNo
Print technologyDirect thermal
Vertical printingYes
Maximum resolution300 x 300 DPI
Minimum print length25.4 mm
Maximum printing width101.6 mm
AC input voltage220 - 240 V
Sustainability certificatesENERGY STAR
Product colorBlack, White
Bluetooth version5.2
Bluetooth profilesBIP, HCRP, OPP, SPP
USB 2.0 ports quantity1
Connectivity technologyWired & Wireless
Tape typeDK
Flash memory7.8 MB
Built-in barcodesAZTECCODE, CODABAR (NW-7), Code 39, Code-128 Codabar Library, Data Matrix, EAN128, EAN13, EAN8, IMB, ISBN-2, ISBN-5, ITF, ITF-25, MaxiCode, PDF417, POSTNET, QR Code, UPC-A, UPC-E
Mac operating systems supportedMac OS X 10.11 El Capitan, Mac OS X 10.13 High Sierra
Mobile operating systems supportedAndroid, iOS
Server operating systems supportedWindows Server 2008, Windows Server 2008 R2, Windows Server 2012, Windows Server 2012 R2, Windows Server 2016
Windows operating systems supportedWindows 10, Windows 10 Education, Windows 10 Enterprise, Windows 10 Enterprise x64, Windows 10 Home, Windows 10 Home x64, Windows 10 IOT Core, Windows 10 Pro, Windows 10 Pro x64, Windows 7, Windows 7 Enterprise, Windows 7 Enterprise x64, Windows 7 Home Basic, Windows 7 Home Basic x64, Windows 7 Home Premium, Windows 7 Home Premium x64, Windows 7 Professional, Windows 7 Professional x64, Windows 7 Starter, Windows 7 Starter x64, Windows 7 Ultimate, Windows 7 Ultimate x64, Windows 7 x64, Windows 8, Windows 8 Enterprise, Windows 8 Enterprise x64, Windows 8 Pro x64, Windows 8 x64, Windows 8.1, Windows 8.1 Enterprise, Windows 8.1 Enterprise x64, Windows 8.1 Pro, Windows 8.1 Pro x64, Windows 8.1 x64
Maximum label width103.6 mm
Maximum label length3 m
Cables includedAC, USB
Label memory255 label(s)
Package weight3274 g
Harmonized System (HS) code84433210
Weight and Dimensions IconWeight and Dimensions
Depth151 mm
Width170 mm
Height222 mm
Weight1730 g

Related product manuals