To Next PageTo Next PageHow to fix Brother QL-580N Label Maker QL printer when it does not print?
If your Brother QL Label Maker isn't printing, ensure the cable is securely connected and the DK Roll is installed correctly with enough roll remaining. Also, verify that the DK Roll compartment cover is closed. If a print or transmission error occurred, turn the printer off and on again. If the issue persists, consider contacting your Brother dealer.
How to reset Brother QL-580N Label Maker and delete data?
To reset your Brother QL-580N Label Maker, press and hold the ON/OFF button to switch the machine OFF. Then, hold down the ON/OFF button for two seconds. Continue holding down the ON/OFF button, and press the CUT button six times. The machine will reset, deleting all transferred data from your PC and restoring it to factory settings.
Why is the power button not lit on my Brother QL-580N Label Maker?
If the power button on your Brother Label Maker is not lit, check that the power cord is inserted correctly. If it is, try plugging it into another electrical outlet.
What to do if there is a cutter error on my Brother Label Maker?
If your Brother Label Maker displays a cutter error, keep the DK roll compartment cover closed and press the ON/OFF button. The cutter will move back to its normal position and turn the machine OFF automatically. After the machine is OFF, inspect the cutter unit and remove any paper jam.
Why is Brother QL-580N P-touch Add-In icon missing in Word?
If the P-touch Add-In icon is not displayed in Microsoft® Word for your Brother Label Maker, quit Microsoft® Outlook®, and restart Microsoft® Word.
What to do if Brother QL-580N Label Maker ejects labels improperly?
If your Brother Label Maker is not ejecting labels properly, check that the ejection path is not blocked. Also, ensure the DK Roll is set correctly by removing and reinstalling it, and verify that the DK Roll cover is closed properly.
How to cancel printing job on Brother QL-580N Label Maker?
To cancel the current printing job on your Brother QL-580N Label Maker, ensure that the printer is ON, and then press the ON/OFF button.
Why does Brother Label Maker print labels with streaks?
Streaks or poor-quality characters on Brother Label Maker prints can occur if the print head or roller is dirty. Lint or dirt from the roller may stick to the print head. If this happens, clean the roller.
Why does my Brother Printer print labels with streaks?
If the printed label from your Brother printer contains streaks or poor quality characters, or the label is not fed correctly, the print head or roller may be dirty. Clean the roller, as lint or dirt from it might be stuck on the printer head.
How to fix Brother QL-580N cutter error?
If a cutter error occurs with your Brother Label Maker, keep the DK roll compartment cover closed and press the ON/OFF button. The cutter will move back to its normal position, and the machine will turn off automatically. After the machine is off, inspect the cutter unit and remove any paper jam.
General| Print technology | Direct thermal |
|---|---|
| Maximum resolution | 300 x 600 DPI |
| Network ready | Yes |
| Standard interfaces | USB |
| Compatible operating systems | Microsoft Windows 2000 Professional Windows XP Windows Vista |
| Maximum label width | 62 mm |
| Maximum label length | 1 m |
| Product color | Black |
