Configuring your network printer
10
2
Setting the IP address and subnet mask 2
Using the BRAdmin Light utility to configure your network printer 2
BRAdmin Light 2
The BRAdmin Light utility is designed for initial setup of Brother network connected devices. It can also
search for Brother products in a TCP/IP environment, view the status and configure basic network settings,
such as IP address. The BRAdmin Light utility is available for Windows
®
XP, Windows Vista
®
, Windows
®
7,
Windows Server
®
2003/2008/2008 R2.
• Use the BRAdmin Light utility version that was supplied on the CD-ROM with your Brother product. You
can also download the latest version of BRAdmin Light utility from
http://solutions.brother.com
• If you require more advanced printer management, use the latest version of BRAdmin Professional utility
that is available as a download from http://solutions.brother.com
This utility is only available for Windows
®
users.
• If you are using personal firewall software (e.g. Windows Firewall), disable it. Once you are sure that you
can print, re-start your personal firewall software.
• Node name: Node name appears in current BRAdmin Light. The default Node name is
“BRNxxxxxxxxxxxx” (“xxxxxxxxxxxx” is the Ethernet address.).
• The default password for Brother print servers is access.
a Start the BRAdmin Light utility.
Click Start / All Programs / Brother / BRAdmin Light / BRAdmin Light.
b BRAdmin Light will search for new devices automatically.
To Next Page
Loading...
Need help?
General
