EasyManua.ls Logo

BRP Lynx 600R E-TEC 2018 - Page 16

BRP Lynx 600R E-TEC 2018
164 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
RIDING THE VEHICLE
2. Check the engine cut-off switch (by
pulling tether cord cap) and emer-
gency engine stop switch opera-
tion.
3. Release parking brake.
4. Refer to the
WARM UP
section and
follow instructions.
Pre-Ride Check List
ITEM OPERATION
Body including seat, footrests,
lights, air filter, controls and
instruments
Check condition and re move snow or ice.
Skis and steering Check for free movement and proper action.
Fuel
Check for proper level.
Engine/injection oil
Check for proper level.
Coolant Check for proper level.
Brake fluid
Check for proper level and no leaks.
Storage compartment
Check for proper latching and no heavy or
breakable objects.
Throttle lever
Check for proper operation.
Track
Check condition and re move snow or ice.
Brake lever
Check for proper operation.
Parking brake
Check for proper operation.
Emergency engine stop switch
and e ngine cut-off switch
(tether cord cap)
Check for proper action. Tether cord must be
attached to operator clothing eyelet.
Lights
Check for proper operation.
Skis and runners Check for proper operation.
Slider shoes Check for proper operation.
Inspect drive belt
Check condition for cracks, fraying or abnormal
wear.
14
_______
SAFETY I
NFORMATION
________

Table of Contents

Related product manuals