EasyManua.ls Logo

BRP Lynx 600R E-TEC 2018 - 16 Mountain Strap (if Equipped)

BRP Lynx 600R E-TEC 2018
164 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
CONTROLS, INSTRUMENTS AND EQUIPMENT
mmo2009-004-019
LOW
mmo2009-004-020
HIGH
mmo2009-004-021
UP
To set the handholds to the desired po-
sition, proceed as follows:
1. Pull up the knob and unscrew sev-
eral turns until the handhold is free
to move.
mmo2009-004-022_a
Step 1: Pull up
Step 2: Unscrew
2. Refer to the decal located on the
RH backrest bracket and guide the
handhold to the desired position.
NOTE: Thedecalcanalsobeseenin
IMPORTANT ON-PRODUCT LABELS
.
3. Screw the knob enough to obtain a
suitable tension.
4. Lower knob to lock the handhold in
place.
Commander 60 0 E-TEC Limited
and 69 Ranger Army LTD
Fixed handholds on each side of the
passenger seat.
fmo2012-003-020_a
TYPICAL
1. Passenger handhold
16) Mountain Strap (If
equipped)
Mountain strap provides a grip for the
driver when side-hilling
.
58
______________

Table of Contents

Related product manuals