BRP Lynx 600R E-TEC 2018 - Page 84

TUNE YOUR RIDE
Electronic Controlled Suspension
( ECS²) (If Equipped)
ECS² system allows to adjust the sus-
pension according the terrain and the
load even while driving.
fmo2015-003-009_a
1. Adjust damping force (MAN)
2. Spring Preload Adjuster (M AN)
3. AUTO adjustment
Adjust damping force
(MAN=manual)
Damping controls the energy absorp-
tion when the shock absorber is being
increased or extended and controls
how fast the shock absorber returns to
its normal position.
fmo2015-003-009_b
To increase or decrease the damping
push the left knob till the MAN/shock
figure led lights up. Push the rig
ht knob
to set the damping. Upwards is more
damping and down is less damping.
Spring Preload Adjuster
(MAN=manual)
The spring preload is fundamental for
the function of the suspension. If the
preload is incorrectly set, any other
adjustments will not help to get the in-
tended performance from the suspen-
sion. More spring preload is needed
when passenger or extra load is on the
vehicle.
fmo2015-003-009_c
To adjust spring preload push the left
button till the MAN/spring figure led
lights up. Push the right knob to set
the preload. Upwards is more preload
anddownislesspreload.
AUTO adjustment
AUTO function have 5 different prese-
lected spring and damping curves.
fmo2015-003-009_d
To use preselected values pus
htheleft
button till AUTO led lights up. Push the
right knob to set the preselected spring
preload and damping force.
Upwards
82
______________