BRUEL & KJAER 2626 - Controls of the Conditioning Amplifier; Front Panel Controls and Indicators

2. CONTROLS
2.1. FRONT PANEL
Conditi on i ng Amp lifi er
8r U.I & klalr Type 2626
,~~0~
Fig.2. 1. View of front panel
The front panel of the preamplifier is as shown in F ig.2.1, and the
functioning of the various control knobs is as follows:
VOLT/gOUT:
Depending on the accelerometer sensivity,
the output sensitivity may be selected
between 1 m V /g -
10 V /g, as shown in the
ranges below.
9