BRUEL & KJAER 4511-W-006 User Manual

BN1100 Revision: 0 Initial Issue: 21/08/2012
ATA 31-10-04
HUMS Accelerometer
Types 4511-W-006 and 4524-W-001
Abbreviated Component Maintenance Manual
Copyright © 2011, Brüel & Kjær Sound & Vibration Measurement A/S
All rights reserved. No part of this publication may be reproduced or distributed in any form or by any means, without prior
written consent from Brüel & Kjær Sound & Vibration Measurement A/S, Nærum, Denmark
The document reference is online, please check the correspondence between the online documentation and the printed version.

BRUEL & KJAER 4511-W-006 Specifications

General

Brand	BRUEL & KJAER
Model	4511-W-006
Category	Measuring Instruments
Language	English

Summary

Section 1 General Description and Operation

1.1 Purpose

Explains the application of the accelerometer for HUMS purposes, its components, and signal output.

1.2 Technical Data

Provides detailed technical specifications for both monoaxial and triaxial accelerometers.

Section 2 Testing

2.1 General

Introduces the need for special tools for testing operations, supplied by the manufacturer.

2.2 Test Conditions

Specifies the required ambient temperature for all testing procedures.

2.3.1 Appearance

Checks labelling, overall dimensions, and electrical connections of the accelerometer.

2.3.2 Transducer Sensitivity Control

Calibrates the transducer and measurement chain using specific equipment and adaptors.

2.3.3 Electrical Test

Verifies the transducer's electrical functionality using a CCLD power supply and meter.

Section 3 Disassembly

Section 4 Standard and Special Tools

4.1 Standard Tools

Lists standard tools used for removal, installation, connecting, and disconnecting operations.

4.2 Special Tools

Details specific tools required for testing and calibration, including part numbers and uses.

Section 5 Consumables

Section 6 Cleaning, Storage and Transportation