BN1100 Revision: 0 Initial Issue: 21/08/2012
ATA 31-10-04
Dielectric Strength 500 Vdc
Signal Ground Isolated from housing
Connection Through a quadrifilar cable
(Double-shielded recommended. Single-shielded possible if connected
to structure in both ends.)
Environmental Characteristics
Temperature Normal Operational Range – 45°C to +125°C
Max operating sinusoidal vibration 50 g pk
Max. Shock Level (peak)
Max. Non-destructive Shock (peak)
5000 g pk (half sine, 1 ms)
Humidity Hermetically sealed
Physical Characteristics
Dimensions See outline drawings in Fig. 4
Weight <50 gram
Case Material Stainless steel AISI 316-LS
Connector GLENAIR type 8070-1072Z16-4CN
Mounting 3 holes in isosceles triangle position
Mounting Accessories
(optional)
3 × DIN 912 A2 M4 × 12 screw
3 × DIN 433 A2 M4 washer
According to SPX902A0002A01
Environmental Constraints
According to DO160E
Marking
Supplier Name, NATO code, p/n, S/N, Date and Measurement axis (3)
Calibration chart
Included Deliverables
Acceptance test summary report
All values are typical at 25°C unless measurement uncertainty is specified.
The document reference is online, please check the correspondence between the online documentation and the printed version.
To Next Page
Loading...
