Icon System Manual T02985_02_03 17
MRI System Overview
The animal holder can be locked in place with the knurled screw on the left side,
see
Figure 2.8
below.
Figure 2.8:
The animal holder was inserted into the magnet and locked in place with knurled
screw (1)
The center of the magnet is reached when the position mark of the animal holder is at the
position marked as “0” position on the magnet front flange.
Figure 2.9:
The position and rotation of the animal holder with respect to the magnet center may
be read from the magnet front flange.
To Next Page
Loading...
