Icon System Manual T02985_02_03 25
Safety (English)
3.3 Shut-Down
Prior to working with the MR system, familiarize personnel with the function and location of
the installed ON/OFF switch.
The ON/OFF switch has the function to switch on/off the electrical power of all electronic
devices of the scanner, except the internal line power distributor and the computer
console. The switch does never affect the magnet, which is always on.
The ON/OFF switch is installed near the magnet. It is recommended to check in regular
intervals the free access to the unit.
If a risk of electrical hazard occurs, the main power supply of the system must be switched
off immediately using the ON/OFF switch.
Figure 3.1: ON/OFF switch
To Next Page
Loading...
