Risk
of personal injury.
Turn off all high power components before cleaning up spilled phantom fluids
inside the MRI system.
Wear protective clothing (gloves, work coat, goggles).
Wear a mask with a filter for inorganic vapors if aerosols (inhalable droplets) are
formed. In case aerosols were inhaled, leave the building immediately to get
fresh air. Consult a physician immediately.
Avoid eye contact with phantom fluids. In case of contamination, consult an
ophthalmologist immediately.
Avoid skin contact with phantom fluids. In case of contamination, immediately
remove the clothing covering the contaminated area and wash the skin using
soap and water. Consult a physician immediately.
Do not swallow phantom fluids. In case phantom fluids were swallowed, rinse
mouth with water and drink plenty of water. Consult a physician immediately.
Absorb the fluid immediately using absorbent material such as sand, saw- dust,
etc. and prevent phantom fluid from entering the waste water system.
Collect the fluid in a plastic container or equivalent and label it accordingly.
Remove any pollution from spilled phantoms inside the MRI system before
using it again.
Clean your hands thoroughly using soap and water and change contaminated
clothing.