Bruker ICON - 5.3.3 Trigger Connection Points; 5.4 Data Storage and Retrieval

Icon System Manual T02985_02_03 83
MRI System Operation
5.3.3 Trigger Connection Points
The trigger connectors including QLA/BNC adapters can be found inside the
anesthesia cabinet near the system power mains connection, see Figure 5.16 . The
connection points are labeled “ECG TRIG IN” (input trigger) and “ECG STAMP”
(output trigger). The other QLA connectors are not connected.
Figure 5.16: Left: Power mains connection point (1), console power connection (2) and trigger
connection points (3) inside the anesthesia cabinet. Right: Enlargement of the trigger connection
points. The input trigger connection is labeled “ECG TRIG IN”; the output trigger connection is
labeled “ECG STAMP”.
5.4 Data Storage and Retrieval
Data storage and retrieval is supported by the ParaVision Data Manager software.
Please refer to the ParaVision Operation Manual for a detailed description of the Data
Manager and supported storage devices.
(1)
(2)
(3)