— 12 —
Troubleshooting
Problem Check
Loss of Power Low hydraulic fluid level
Overheated hydraulic fluid*
Contaminated hydraulic fluid*
Low gearbox lubricant level
Broken gearbox /motor shear pin
Missing input shaft key
Excessive Dull, broken or damaged blades
Unit Vibration Bent gearbox shaft
Blade carrier out of balance
Loose nuts and bolts
New blade or bolts matched with worn blade or bolts
Wire or rope wrapped around blades
Leaking Oil Loose hydraulic connections
Ruptured hydraulic motor seals
Bent gearbox shaft
Loose or missing motor drain plug
Ruptured hydraulic motor seals
*May damage hydraulic motor and void warranty
Note: When performing maintenance, shut down the skid steer and remove
hydraulic hoses from the power source.
To Next Page
Loading...