EasyManua.ls Logo

Brush Wolf 7201 - Additional Safety Guidelines; Hydraulic Fluid Hazards; General Safety Directives

Default Icon
44 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
7 www.brushwolf.com
Safety Instructions
Do Not operate the Brush Wolf in conditions with poor visibility.
Do Not expose the underside of the blades towards the cab.
Do Not operate while intoxicated or if taking medications that may impair your senses or reac-
tions.
Do Not attempt to straighten blades. Order replacement blades if blades are bent,
cracked or damaged.
Do Not leave the Brush Wolf unattended while in a raised position. Always make sure both the
runners are placed firmly on the ground and shut down the skid steer.
Do Not continue operation if an unexpected object is struck. IMMEDIATELY shut down pow-
er to both the attachment and the skid steer. Disconnect the hydraulic couplers from the power
source. Evaluate the damage, repair and the test unit before operation.
Do Not allow anyone or any item on top of the mower deck when in operation.
Do Not operate until all of the members of your work crew are alerted to the dangers of walking
up to the brush cutter while in operation.
Make sure all hydraulic connections are tight and hoses and shields are in good
condition before applying pressure.
Hydraulic fluid escaping under pressure can penetrate skin and cause serious injury.
If this type of injury occurs, seek medical attention immediately.

Related product manuals