Bryant Preferred T6-PAC01-A Installation Instructions

2
INTRODUCTION
Bryant’s 7-day, 5/2- day, 1-day programmable and non- programmable Preferredt
Series Thermostat Control is a wall- mounted, low- voltage temperature control in
either a single unit or a two- piece unit. In two - piece configuration, the relays are
located near the equipment and a two-wire connection is used between the Display
Module and the Equipment Control Module. Single - piece installation requires more
wiring and results in a higher profile. The Preferred Series Thermostat has no need
for batteries to store user-configured settings in memory. During power loss its
internal memory saves settings for unlimited time, and the clock continues to run
for at least 24 hours. An extension of Bryant’s proven line of thermostats; it
provides separate setpoints for heating and cooling.
In the control’s programmable configuration, different heating and cooling setpoints
and times are programmable for 4 periods per day or 2 periods per day.
Programming can be done for 7 days per week, 5/2 days per week, or 1 day. The
programmable Thermostat Control can also be user configured as a
non- programmable Thermostat Control.
The non-programmable Thermostat Control features Touch ’N’ Got settings for
quick and easy temperature change without complicated programming schedules.
And, its Touch ’N’ Go technology enables the user to switch between three
different user - configurable settings through intuitive buttons located just below the
display.

Bryant Preferred T6-PAC01-A Specifications

General

Brand	Bryant
Model	Preferred T6-PAC01-A
Category	Thermostat
Language	English