18
Leaving It Behind
If you’re moving and are not taking your Legacy Line Wi--Fi Thermostat
with you, log onto the Web Portal and select Reset under the Settings
tab. Select Reset Registration. This terminates the association between
your Legacy Line Wi--Fi Thermostat and your personalized Web Portal
(you can also accomplish the same thing by choosing Reset Registration
on the Legacy Line Wi--Fi Thermostat itself).
You can always add another device for your new home with the same
account.
The new homeowners will need to register the Legacy Line Wi--Fi
Thermostat and set up their own Web Portal.
Taking It With You
If you’re moving and want to take the Legacy Line Wi--Fi Thermostat
with you, you’ll need to re--connect it to the Internet and update your
location and house information (select My House under the Settings tab)
.
CONFIGURING YOUR LEGACY LINE Wi--Fi
THERMOSTAT
This section describes how to configure the personal preferences,
temperature settings, and operation of your Legacy Line Wi--Fi
Thermostat. There are three key steps:
d Configure Personal Preferences
d Set up Reminders and Alerts
d Create your Weekly Schedule
NOTE: You can also configure your Legacy Line Wi--Fi Thermostat
from your personalized Web Portal. Simply open a web browser, go to
www.Bryant.com/myhome, and log in.
To Next Page
