15
Update Schedule The fan will update the current
schedule with this new fan setting.
After the fan mode is changed and you return to the home screen,
the Legacy Line Wi--Fi Thermostat will indicate that it is in a Hold
state. The temperature setting will also be set to Hold. Press OK to
revert the fan mode back to the weekly schedule fan and
temperature settings.
d Minimum “On” Time Sets a minimum amount of time per hour
that the furnace fan will run. This improves air circulation, results
in a more consistent temperature than the Auto setting, and is
more cost--effective than the On setting.
Weather Forecast
Displays the current outdoor temperature and weather conditions for your
registered location.
Note that when you register, it is important to select your location
accurately, as Bryant will use your local weather data to optimize your
heating and cooling. You must register your Legacy Line Wi--Fi
Thermostat for this feature to operate.
A13375
Fig. 4 -- Weather Forecast Screen
To view the weather forecast:
From the Home screen, press MENU.
To Next Page
Loading...
Need help?
General
